IntegraRack IR-B1 Bonding Jumper – 12 Inch (10 Pack)

Description

IntegraRack IR-B1 Bonding Jumper – 12 Inch (10 Pack)

The IntegraRack IR-B1 Bonding Jumper provides a practical solution for electrical bonding between compatible solar panel rows. Each jumper measures 12 inches and is UL 2703 recognized according to the manufacturer. Geo Eco Systems offers this product in a convenient 10-pack, giving solar installers an efficient way to purchase multiple bonding connections for their mounting projects.

IntegraRack designed the IR-B1 bonding jumper for use with its solar mounting products. However, the manufacturer particularly recommends it for bonding between rows in MultiBallast systems. The 12-inch length offers additional reach compared with the 8-inch version, making it useful where approved mounting layouts require a longer connection.

Electrical Bonding Between Solar Panel Rows

Electrical bonding is an essential part of a properly designed photovoltaic mounting system. It establishes intentional electrical continuity between designated conductive components. Consequently, suitable bonding connections help support the equipment grounding arrangement specified for the solar installation.

The IntegraRack IR-B1 12-inch bonding jumper connects approved bonding points between compatible solar panel rows. Its formed metal conductor features connection terminals at both ends, allowing installers to incorporate the jumper into supported mounting configurations.

For reliable results, installers must follow the manufacturer’s instructions for attachment locations, compatible hardware, and installation procedures. Proper bonding depends on the complete mounting system rather than the jumper alone.

UL 2703 Recognized Bonding Component

According to IntegraRack, the IR-B1 bonding jumper is recognized under UL 2703. This standard addresses safety requirements for photovoltaic mounting systems, including applicable bonding and grounding provisions.

UL recognition identifies the jumper as a component evaluated for specified conditions of use. However, it does not automatically certify every installation or combination of mounting products.

Therefore, always verify the manufacturer’s approved applications and current installation instructions. In addition, follow applicable electrical codes and local requirements when designing or installing the bonding system.

Recommended for IntegraRack MultiBallast Systems

IntegraRack identifies the IR-B1 jumper as suitable for its mounting product lineup, with a particular recommendation for bonding between rows of its MultiBallast solar mounting system.

MultiBallast installations can include several rows of photovoltaic modules. As a result, installers must consider the bonding connections required between designated mounting components and rows.

The 12-inch jumper provides an additional length option for these applications. Nevertheless, installers should verify that the jumper reaches the specified connection points without excessive tension or improper routing.

Convenient 10-Pack for Solar Installers

Geo Eco Systems packages this product as 10 individual 12-inch IR-B1 bonding jumpers. This multi-pack format makes ordering easier for contractors, solar installers, and customers preparing compatible mounting projects.

Instead of purchasing jumpers individually, customers can order ten at once. Furthermore, having multiple bonding components available can simplify installation planning and material organization.

Each quantity of one added to the shopping cart represents one complete 10-pack. Solar modules, mounting frames, and other installation hardware are sold separately.

Product Specifications

• Manufacturer: IntegraRack
• Model: IR-B1
• Manufacturer Part Number: IR-B1BJ1279
• Product Type: Solar Panel Bonding Jumper
• Individual Jumper Length: 12 Inches
• Package Quantity: 10 Bonding Jumpers
• Safety Recognition: UL 2703 Recognized
• Primary Application: Electrical Bonding Between Solar Panel Rows
• Recommended System: IntegraRack MultiBallast
• Shipping Dimensions: 13 × 3 × 3 Inches
• Shipping Weight: 1 lb

Installation and Compatibility Considerations

Before installation, confirm that the IR-B1 jumper is approved for your mounting system and intended bonding arrangement. Review the required connection points, hardware, and routing instructions.

Additionally, determine whether the 12-inch length is appropriate for your installation. Select bonding components according to the manufacturer’s instructions rather than relying on jumper length alone.

Order IntegraRack Bonding Jumpers from Geo Eco Systems

Geo Eco Systems supplies solar mounting equipment and accessories for residential, commercial, and off-grid projects. Our IntegraRack IR-B1 Bonding Jumper 12-Inch 10-Pack provides a convenient purchasing option for installers who need multiple bonding connections.

Choose the appropriate jumper length for your compatible solar mounting system and order the quantity required for your project.